Cheep feeder.. 20 min build

Discussion in 'Feeding & Watering' started by cogburn, Oct 20, 2012.

  1. cogburn

    cogburn New Member

    1,267
    3
    0
    1 old 5 gallon bucket (either upright w lid or upside down without a lid) cut 4 holes evenly around bucket at bottom of tub/pan, give it a twist & shake to disperse feed.
    1 old plastic tub, dogs had chewed it up so i trimmed it down. But a dollar store automotive oil drain pan will work.
    Drill a small hole in bottom of tub, run a long piece of stiff wire thru hole and lid or bottom of bucket, long enough to hang.
    I cut a round piece of old barn tin to be bigger than tub/pan as a poop/water guard. And in bottom or lid of bucket I cut a access hole to stick a big funnel and I fill it that way. Anyone can build this. I just was bored yesterday.

    Pics following
    Cogburn
     

    Attached Files:

  2. rob

    rob New Member

    2,300
    0
    0
    cool. good idea, recycling at its best.
     

  3. cogburn

    cogburn New Member

    1,267
    3
    0